Home> Products>Material

Products

Material

To inquire or purchase, select products on  and click
Acrylonitrile Butadiene Rubber (NBR)

Acrylonitrile Butadiene Rubber (NBR)

Advantage:1. Has good solvent, oil, water and hydraulic fluid resistance. 2. Good compression set, abrasion resistance and tensile strength.Disdvantage: 1. Not recommended for using in highly polar solvents such as aceto...

Butyl Rubber

Butyl Rubber

Advantage:1. Impermeable to most common gasses. 2. Good resistance to sunlight and ozone Normally satisfactory when exposed to animal and vegetable oils and oxidizing chemicals.Disdvantage: 1. Not recommended for use wit...

Chloroprene Rubber (CR)

Chloroprene Rubber (CR)

Advantage: 1. High resilience with low compression set. 2. flame resistance. 3. Compounds free of sulphur are easily made. 4. Animail and vegetable oil resistance. 5. Not affected by moderate chemicals, fats, greases and...

Ethylene Propylene Rubber (EPDM)

Ethylene Propylene Rubber (EPDM)

Advantage: 1. Exceptionally good weather aging and ozone resistance. 2. Excellent water and chemical resistance. 3. Excellent resistance to gas permeability and aging due to exposure to steam. 4. Excellent resistance up ...

Fluoro Elastomers (FKM/FPM)

Fluoro Elastomers (FKM/FPM)

Advantage: 1. Heat resistance up to 600°F 2. Resistance to wide range of oils and solvents; specially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. Disdvantage: 1. Not recomm...

Fluorosilicone Rubber (FVMQ)

Fluorosilicone Rubber (FVMQ)

Advantage: 1. More expensive than silicone, and for special applications where general resistance to oxidizing chemicals, aromatic and chlorinated solvent bases is required.Disdvantage: 1. Not recommended for and general...

Hydrogenated Acrylonitrile Rubber (HNBR)

Hydrogenated Acrylonitrile Rubber (HNBR)

Advantage: 1. Exhibit better wear resistance than standard nitrile. 2. Excellent abrasion, compression set, tensiles, and tear properties. 3. Good resistance to ozone, sunlight, and other atmospheric conditions. 4. Vastl...

Natural Rubber (NR)

Natural Rubber (NR)

Advantage: 1. High resilience. 2. Good compression set. 3. Food roll building behavior and molding properties. 4. Good friction surface, but not a fine smooth surface when ground. 5. High tear strength. 6. Low crack grow...

To inquire or purchase, select products on  and click
Go Top
Address: No. 41, Wu-Chuan-Wu Road, New Taipei Industrial Park, New Taipei City, 24888, TAIWAN
TEL: +886-2-2298-8670    FAX: +886-2-2299-2189     Email: mfc@mfc.com.tw
Copyright © 2012  MFC Sealing Technology Co., Ltd.   All rights reserved.  -Privacy Policy